Cantilever Roped, Rear/Side Slung

>>>Cantilever Roped, Rear/Side Slung
Cantilever Roped, Rear/Side Slung 2018-07-03T17:42:35+00:00

A = Platform Width
B = Platform Depth
C = Hoistway Width
D = Hoistway Depth

E = Clear Door Opening
O = Overhead
P = Pit Depth
S = Platform to Wall

Download Available Information

Inquire About This Product

Contact an Elevator Package Representative to place an order

Application Summary

This is a holeless design limited to low capacity applications. Wire ropes are utilized in conjunction with a hydraulic jack to lift the car at a 1:2 ratio. For every foot that the jack rises, the car rises two feet. The jack and rail equipment is mounted either to the side or to the rear of the car, depending upon the opening configuration.

Advantages

  • No jack hole is required even though the travel can be as great as 100 feet. Without a jack in the ground, the risk of oil contamination is eliminated.
  • Front & side openings can be easily accommodated.
  • No extensive pit or overhead is required.
Code year adoptions and local code variations may affect the hoistway size. Verify all dimensions with MEI prior to construction.

ENGINEERED TO ORDER – Contact MEI For Sizes or Capacities Outside Listed Ranges

Specifications

Passenger Elevators – Standard Specifications (Low Capacity)
Capacity (lbs)
Platform
A x B
Hoistway
C x D
Front/Rear
Laminate Clear Inside W x D
Door Type
Door Width E
Side Door Type
Side Door Width F
Elevation & Plan View Drawings
2100 Lbs
6′ -0″ x 5′ -1″
7′ -4″ x 7′ -3 1/4“
F
5′ -9″ x 4′ -3 1/2“
1-SP
3′ -0″
DWG File PDF File
2100 Lbs
6’-5 1⁄2” x 5’-1 1⁄4”
7’-8” x 7’-3 1⁄2”
F/S
5’-9” x 4’-3 1⁄2”
1-SP
3′ -0″
2-SP
3′ -0″
DWG File PDF File
2500 Lbs
7′ -0″ x 5′ -1″
8′ -4″ x 7′ -3 1/4“
F
6′ -9″ x 4′ -3 1/2“
1-SP
3′ -6″
DWG File PDF File
2500 Lbs
7’-5 1⁄2” x 5’-1 1⁄4”
8’-8” x 7’-3 1⁄2”
F/S
6’-9” x 4’-3 1⁄2”
1-SP
3′ -6″
2-SP
3′ -6″
DWG File PDF File
3000 Lbs
7′ -0″ x 5′ -6″
8′ -4″ x 7′ -8 1/4“
F
6′ -9″ x 4′ -8 1/2“
1-SP
3′ -6″
DWG File PDF File
3000 Lbs
7’-5 1⁄2” x 5’-6 1⁄4”
8’-8” x 7’-8 1⁄2”
F/S
6’-9” x 4’-8 1⁄2”
1-SP
3′ -6″
2-SP
3′ -6″
DWG File PDF File
3500 Lbs
7′ -0″ x 6′ -2″
8′ -4″ x 8′ -4 1/4“
F
6′ -9″ x 5′ -4 1/2“
1-SP
3′ -6″
DWG File PDF File
3500 Lbs
7’-5 1⁄2” x 6’-2 1⁄4”
8’-8” x 8’-4 1⁄2”
F/S
6’-9” x 5’-4 1⁄2”
1-SP
3′ -6″
2-SP
3′ -6″
DWG File PDF File
4000 Lbs
8′ -0″ x 6′ -2″
9′ -4″ x 8′ -5 3/4“
F
7′ -9″ x 5′ -3″
2-SP
4′ -0″
DWG File PDF File
4000 Lbs
8’-5 1⁄2” x 6’-0 3⁄4”
9’-8” x 8’-3”
F/S
7’-9” x 5’-3”
1-SP
4′ -0″
2-SP
4′ -0″
DWG File PDF File

P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -5″ • Cab Height = 8′ -0″ • S Platform to Wall = 20″